Départ. Technical support- CM640
PROCEDURE
COMPANY RESTRICTED
PHILIPS Consumer
Communications
Centre du Mans
Service Repair Support
VY-V-640-204
Page : 25 of 42
Langue : EN
Date : 09/21/01
PHILIPS ELECTRONICS N.V. 1999
VY-V-640-204
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
Home page parameter (URL):
This parameter is a string of characters (ASCII) used to identify the protocol (eg: HTTP), the location of the
server (eg: WAP.Philips.com), the port number (optional if = 80) and the access path
(eg:/glossair/glossair.htm).The end user can use the operator’s home page or set up another one in the mobile
phone. The URL can be set as follows:
8.4.3
W@P Application launch
The phone is now ready to access to the W@P Gateway. Please launch the W@P application to ensure it works
properly.
8.4.4
Memory reliability
After recording the W@P parameters :
Ø
Turn off the mobile
Ø
Remove the battery
Ø
Wait 5 seconds
Ø
Clip the battery again
Ø
Turn on the mobile
Ø
Check that the parameters still present.
Press OK to
set the home
page
Enter the home address
and press OK