28 EN
Wi-Fi
Wi-Fi Connection cannot be established.
•
Check the availability of WLAN
network on the router.
•
Place the Wi-Fi router closer to the
unit.
•
Make sure the password is correct.
•
Check the WLAN function or reboot
the modem and Wi-Fi router.
Dolby Atmos
Cannot achieve outstanding Dolby
Atmos effects.
•
For non-HDMI connections (such
as use of USB, Bluetooth, Optical or
AUDIO IN), limited height surround
effects are generated. See the
section of ‘Dolby Atmos’ about how
to achieve best Dolby Atmos effects.
Play-fi
Cannot discover the Play-fi supported
devices from the app.
•
Make sure the device is connected to
the Wi-Fi.
Cannot play Play-fi music.
•
Certain network service or contents
available through the device may
not be accessible in case the service
provider terminates its service.
•
When the first time set up is not
successful, close the Philips Sound
app powered by DTS Play-fi. Restart
the app.
•
When the speaker was set as Stereo
Pairs or Surround Sound, the speaker
need to be disconnected in the App
before use separately.
Remote control does not work
•
Before you press any playback
control button, first select the correct
source.
•
Reduce the distance between the
remote control and the unit.
•
Insert the battery with its polarities
(+/-) aligned as indicated.
•
Replace the battery.
•
Aim the remote control directly at
the sensor on the front of the unit.
This is a 15 mins power off
function, one of the ERPII standard
requirement for saving power
•
When the unit’s external input
signal level is too low, the unit will
be turned off automatically in 15
minutes. Please increase the volume
level of your external device.
