22 EN
Update firmware via USB
Check if there is the latest firmware
version on www.philips.com/support.
Search for your model and click on
“
Software and drivers
”.
Copy the software update files into USB
flash drive, insert USB flash drive on the
unit.
•
INSERT USB
(if no USB)
•
PLAY TO START
(if FW is detected)
•
Upgrade finished and restart.
Factory Reset
Reset device to default setting.
•
Set is ON, press and hold the
and
buttons at the same time for 8
seconds.
»
Display shows “RESET” for 5
seconds.
»
While system reboot, display
shows “REBOOT”
Play from Bluetooth
devices
Through Bluetooth, connect the
soundbar with your Bluetooth device
(such as an iPad, iPhone, iPod touch,
Android phone, or laptop), and then you
can listen to the audio files stored on the
device through your soundbar speakers.
1
Press the button repeatedly on the
unit or on the remote control to switch
the soundbar to Bluetooth mode.
»
NO BT
is displayed on the display
panel.
2
On the Bluetooth device, switch
on Bluetooth, search for and
select “
Philips Fidelio FB1
” to start
connection (see the user manual
of the Bluetooth device on how to
enable Bluetooth).
3
Wait until you hear the voice prompt
from the soundbar.
»
If the successfully connected,
BT
is displayed on the display panel.
4
Select and play audio files or music
on your Bluetooth device.
•
During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
•
If your Bluetooth device supports
AVRCP profile, on the remote
control you can press / button
to skip to a track, or press
button to pause/resume play.
5
To exit Bluetooth, select other
source.
•
When your switch back to
Bluetooth mode, Bluetooth
connection remains active.
•
If you want to connect your
soundbar with another Bluetooth
device, press and hold button
to disconnect the currently
connected Bluetooth device.
Note
•
A Bluetooth device which supports Bluetooth
profile A2DP, AVRCP and with Bluetooth version
as 4.2 + EDR.
•
The maximum operational range between
the soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
•
Compatibility with all Bluetooth devices is not
guaranteed.
•
The music streaming may be interrupted by
obstacles between the device and soundbar,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
