Philips FaxJet 520, Руководство пользователя

Страница: 4 / 40

4 Philips IPF 520 · 525 · 555
EN
Connecting handset
Type 3 (mit Telefon) (IPF¦525, IPF¦555)
Plug one end of the spiral cable into the socket on the tel-
ephone handset. Put the other end into the socket at the
device bottom marked with
)
symbol.
Telefonhörer anschließen
Connecting the Telephone Cord
Connecting the Telephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with
LINE
(RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Telefonkabel anschließen
PABX Systems 1
Connecting the Power Cord
Mains Voltage at Setup Location
Connecting the Mains Cable
Insert the mains cable into the connection located on the
rear side of the device. Connect the mains cable to the elec-
trical socket.
Netzkabel anschließen Faxjet
Inserting ink cartridge
1 Open the control panel, by lifting and folding it up in
the centre. Click the control panel completely in place.
2 Open the cartridge compartment by pressing on the
upper right corner of the document holder (arrow) and
then carefully lifting it backwards. Click the document
holder completely in place.
3
Remove the cartridge from the packing and remove the
protective strips.
4
Insert the cartridge into the holder with the coloured
end facing front and the contacts facing down.
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 30).
Check whether the mains voltage of your device (in-
dicated on the type label) matches the mains voltage
available at the setup location.
Please make certain that the protective strip has
been completely removed. Be careful not to touch
the nozzles or contacts.