11
A
StanD-BY moDe
The machine is designed for energy saving. After 60 minutes of inactivity, the machine goes into stand-by mode, the boiler is no longer
heated and all the devices turn off .
Power consumption is reduced to a minimum. Press any button to turn the machine on again.
The machine status can be manually changed to stand-by mode by holding the stand-by button pressed for 3 seconds.
Note:
1 The stand-by mode cannot be activated if the service door is left open.
2 The stand-by activation time can be changed in the "MACHINE MENU" on
page 26.
3 When the stand-by mode is activated, the machine performs a rinse
cycle of the internal circuits, if necessary. The cycle can be interrupted by
pressing the "STOP" button.
The machine can be turned on again by executing one of the following actions:
1 By pressing any of the control panel buttons.
2 By opening the service door (when closing the door the machine goes back to
stand-by mode).
The red light fl ashes when the machine
is in stand-by mode.
