16
1
2
3
CaPPUCCIno
ProDUCt BreWInG
AT THE BEGINNING OF THE DISPENSING PHASE, THE MACHINE MAY PRODUCE SOME SPURTS OF MILK AND
STEAM: RISK OF SCALDING! ALWAYS WAIT FOR THE CYCLE TO END BEFORE REMOVING THE CONTAINER.
REFER TO THE SECTION "MILK CARAFE USE" (SEE PAGE 12).
Place the cup or the container where the
milk-based product will be prepared.
Rotate the handle upper part of the
container on the cup. To avoid spilling
milk, always use cups of adequate size.
Select the desired milk product by
pressing the corresponding button: you
can select only one milk product at a
time.
CAPPUCCINO
PLEASE WAIT …
4
CAPPUCCINO
STOP
5
The machine starts brewing: it grounds
the coff ee and warms up to dispense milk.
In this case the ECOMODE function is set to
"ON" (see page 26).
Milk dispensing begins. This operation
can be stopped by pressing "STOP".
When brewing milk products, the machine dispenses the milk fi rst and then brews the coff ee.
In this case, simultaneously brewing a double product is not possible.
The machine requires a certain waiting time because the ECOMODE function is activated to allow energy saving.
Preparing cappuccino and other milk beverages can be a quicker operation if the ECOMODE function is deactivated; this, however, at the
expense of energy saving.
This function can only be deactivated by means of the "MACHINE MENU" (see page 26).
CAPPUCCINO
STOP
6
Once milk has been dispensed, the
machine starts brewing the coffee. This
operation can be stopped by pressing
"STOP".
