32
PAUSE
STEP 1/2 DESCALING
7
PAUSE
STEP 1/2 DESCALING
8
OK
RINSE TANK &
FILL WITH WATER
9
OK
RINSE TANK &
FILL WITH WATER
10
OK
EMPTY TRAY UNDER
BREW GROUP
4
OK
EMPTY TRAY UNDER
BREW GROUP
11
OK
PLACE A CONTAINER
UNDER HOT WATER &
CARAFE DISP SPOUT
6
OK
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
5
OK
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
12
The descaling cycle is activated.
The bar shows the cycle's progress.
If the containers need to be emptied,
press the "PAUSE" button.
Then, press the "START" button when the
container has been emptied and replaced.
At the end of the first step, when the
descaling solution is finished, the
machine will require a tank rinse.
Rinse the water tank and refill it with
fresh drinking water.
Then, press the "OK" button.
Empty the drip tray placed under the
dispensing spout (page 36 - fig. 2) and
then replace it on the machine.
Then, press the "OK" button.
Empty the drip tray placed under the
dispensing spout (page 36 - fig. 2) and
replace it back onto the machine.
Then, press the "OK" button.
Place a container under the dispensing
spout and a container under the hot
water wand.
Then, press the "OK" button.
Fill half the carafe with fresh water
(page 34 - fig. 7).
Insert the carafe and place it in the
brewing position. Then, press the "OK"
button.
Completely empty the carafe (page 34 -
fig. 7) and fill it with fresh water.
Insert the carafe in the brewing position,
and then press the "OK" button.
A default amount of water is needed for the rinsing step. This allows performing an ideal rinse cycle to ensure the best conditions to
brew products. The message about filling the tank for the rinse cycle is normal, as it is part of the procedure.
maIntenanCe
