41
EN
41
EN
Recording
Basic Setup
Connections
Playback
Editing
Introduction
Function Setup
VCR Functions
Others
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
5
Press [STOP
C
] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 76.)
e.g.) DVD+R
Writing to Disc
Finalize the recordings so that the disc
can be played on regular DVD players.
90%
1
SP(2Hr)
2
EMPTY TITLE
1:41:17 SP(2Hr)
NOV/21/07 11:00AM CH12 SP
NOV/21/07 0:20:44
• Press
[STOP
C
]
to exit the title list.
4
Press [REC
I
] to start recording.
“
I
” will be displayed for 5 seconds.
I
Press
[PAUSE
F
]
to pause recording.
Press
[PAUSE
F
]
or
[REC
I
]
again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press
[REC
I
]
repeatedly until the desired recording
time (30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
0:30
(normal recording)
6:00
5:30
1:00
I
0:30
To change the recording length during the one-
touch timer recording:
Press
[REC
I
]
repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press
[STOP
C
]
.
Note
• When you press
[REC
I
]
,
recording starts immediately and continues until the disc is full or you stop recording.
• This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
• When the unit clock has not been set, the space for a date and time of title names will be blank.
• When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 33-34 for more details.
• This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
• You cannot change the recording mode during the recording pause mode.
• You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
• The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[INFO]
to see it on the TV screen.
• Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning off the power to stop one-touch timer recording.
- Using
[REC
I
]
.
• You cannot use the pause function during one-touch timer recording.
• When one-touch timer recording is finished and the power is turned off, the unit will switch to the timer-standby
mode automatically if a timer recording has been programmed. Press
[TIMER SET]
to cancel the timer-standby
mode to use the unit continuously.
