Philips DTR500/05, Руководство пользователя

Страница: 25 / 40

English
CHANGE THE SETTINGS OF YOUR RECEIVER 25
7.2.3.3 Channel Banner
This item is used to select the channel banner display
settings.
- Scroll to the setting you want to change.
The corresponding values are displayed on the right-hand
side of the screen.
- Press the
i
button to access the available values:
• Duration
• Transparency
7.2.3.4 Volume
This item is used to select the volume level at wake-up.
- Press the
i
button to access setting value.
- Press
t
or
y
to modify the volume level.
- Press <OK> to confirm.
7.2.3.5 Remote Control
This item is used to set the remote control address.
- Press the
i
button to access the available values.
- Move to the address you want to select: 039 or 038.
Default address is 039, which makes it possible to control
your receiver using any Philips TV set remote control.
- Press <OK> to confirm your selection.
- Proceed as described in paragraph 9.
1
.
Note: if you do not complete the procedure as described in
paragraph 9.1, you will not be able to control your receiver
using your remote control.
7.3 Installation
- Press the <MENU> button to open the main menu.
- Press the
y
button to bring the selection onto
Installation.
- Press the
i
button to access the Installation sub-menu.
7.3.1 Service lists
This item is used to manage your service lists.
- Press the
i button to access the service list features.
NOTICE DTR 500.qxd 7/09/2004 15:25 Page 25