Philips DTR500/05, Руководство пользователя

Страница: 13 / 40

English
- Plug your aerial lead plug into the “AERIAL IN” socket of your digital receiver.
- Connect the “RF OUT” socket of your digital receiver to the “ANT IN” socket of your VCR by
means of the RF coaxial lead supplied with your digital receiver.
- Connect the “ANT OUT” socket of your VCR to the aerial input socket of your TV by means of a
RF coaxial lead.
- Connect the “TV” SCART socket of your digital receiver to the “EXT 1 ” SCART socket of your TV
by means of the SCART lead supplied with your digital receiver.
- Connect the “VCR” SCART socket of your digital receiver to the “EXT2” SCART socket of your
VCR by means of a SCART lead.
- Plug all your equipment, excluding your digital receiver, into the mains.
- Switch on your TV and select a channel.
- Plug your digital receiver into the mains.Your digital receiver will display the WELCOME screen
(the green LED will be illuminated).
- Read on chapter 5 to proceed with the channel scan of your digital receiver.
Note:
1
- If you have a S-Video VCR refer to paragraph 7.2.3.2 for further settings and consult the user manual of
your VCR.
2- With this connection set up you can:
-
Watch digital TV while you record analogue TV.
- Watch analogue TV while you record digital TV.
- Record the digital TV channel you are watching.
- Watch Play Back from your VCR.
CONNECTING YOUR DIGITAL RECEIVER 13
NOTICE DTR 500.qxd 7/09/2004 15:24 Page 13