Philips DS9860W, Руководство пользователя

Страница: 4 / 30

2
EN
1 Important
Safety
Information for Europe:
To reduce the risk of fire or electric shock, do
not expose the product to rain or moisture and
do not place any objects filled with liquids, such
as vases, on the product.
a
Read these instructions.
b
Keep these instructions.
c
Heed all warnings.
d
Follow all instructions.
e
Do not use this product near water.
f
Clean only with dry cloth.
g
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
h
Do not remove the casing of this product.
i
Only use this product indoors. Do
not expose the product to dripping /
splashing water, rain or high humidity.
j
Keep this product away from direct
sunlight, naked flames or heat.
k
Do not install near any heat sources
such as radiators, heat registers, stoves,
or other electrical equipment (including
amplifiers).
l
Do not place any other electrical
equipment on the product.
m
Do not place any sources of danger
on the product (e.g. objects containing
liquids, burning candles).
n
This product may include batteries. Please
refer to safety and disposal instructions
for batteries in this user manual.
o
Where the mains plug or an appliance
coupler is used as the disconnect device,
the disconnect device shall remain readily
operable.
Warning
•
Never remove the casing of this apparatus.
•
Never lubricate any part of this apparatus.
•
Never place this apparatus on other electrical
equipment.
•
Keep this apparatus away from direct sunlight, naked
flames or heat.
•
Ensure that you always have easy access to the power
cord, plug or adaptor to disconnect this apparatus from
the power.
Risk of overheating! Never install this apparatus
in a confined space. Always leave a space of
at least four inches around this apparatus for
ventilation. Ensure curtains or other objects
never cover the ventilation slots on this
apparatus.
Mains fuse
This information applies only to products with a
UK mains plug.
This product is fitted with an approved molded
plug. If you replace the fuse, use one with:
• the ratings shown on the plug,
• a BS 1362 approval, and
• the ASTA approval mark.
Contact your dealer if you are not sure about
what type of fuse to use.
Caution: To conform with the EMC directive
(2004/108/EC), do not detach the plug from
the power cord.