iii
Read and follow these instructions when connecting and using your OPS Module:
• Unplug the OPS Module if you are not going to use it for an extensive period of time.
• Unplug the OPS Module if you need to clean it with a slightly damp cloth. The screen many be wiped with a dry cloth when the
power is off. However, never use alcohol, solvents or ammonia-based liquids.
• Consult a service technician if the OPS Module does not operate normally when you have followed the instructions in this manual.
• The casing cover should be opened only by qualified service personnel.
• Keep the OPS Module out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into the vents or prevent proper cooling of the OPS Module’s electronics.
• Do not block the ventilation holes on the cabinet.
• Keep the OPS Module dry. To avoid electric shock, do not expose it to rain or excessive moisture.
• When turning off the OPS Module by detaching the power cable or DC power cord, wait for 6 seconds before re-attaching the
power cable or DC power cord for normal operation.
• To avoid the risk of shock or permanent damage to the set do not expose the OPS Module to rain or excessive moisture.
• When positioning the OPS Module, make sure the power plug and outlet are easily accessible.
EU Declaration of Conformity
This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to
Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), RoHS directive (2011/65/EU) and Radio Equipment Directive (2014/53/
EU).
This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards
published under Directives of Official Journal of the European Union.
Warning:
This equipment is compliant with Class A of EN55032/CISPR 32. In a residential environment this equipment may cause radio interference.
Federal Communications Commission (FCC) Notice (U.S. Only)
NOTE:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Use only an RF shielded cable that was supplied with the display when connecting this display to a computer device.
To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
