ii
Safety Instructions
Safety precautions and maintenance
WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to
shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your OPS Module:
Operation:
• Keep the OPS Module out of direct sunlight and away from stoves or any other heat sources.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the OPS Module’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the OPS Module, make sure the power plug and outlet are easily accessible.
• When turning off the OPS Module by detaching the power cord, wait 6 seconds before re-attaching the power cord for normal operation.
• Ensure the use of an approved power cord provided by Philips at all times. If your power cord is missing, please contact your local service center.
• Do not subject the OPS Module to severe vibration or high impact conditions during operation.
• Do not knock or drop the OPS Module during operation or transportation.
• For doors or covers intended to be removed by operator for installation of accessory devices. Instructions shall be provided for the correct removal
and reinstallation of the door.
Maintenance:
• Unplug the OPS Module if you are not going to use it for an extensive period of time.
• Unplug the OPS Module if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However,
never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your OPS Module.
• To avoid the risk of shock or permanent damage to the set, do not expose the OPS Module to dust, rain, water or an excessively moist environment.
• If your OPS Module becomes wet, wipe it with dry cloth as soon as possible.
• If a foreign substance or water gets in your OPS Module, turn the power off immediately and disconnect the power cord. Then remove the foreign
substance or water, and send the unit to the maintenance center.
• Do not store or use the OPS Module in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your OPS Module and ensure a longer lifetime, we strongly recommend using the OPS Module in a
location that falls within the following temperature and humidity ranges.
-
Temperature: 0-40°C 32-104°F
-
Humidity: 20-80% RH
Service:
• The casing cover should be opened only by qualified service personnel.
• If there is any need for repair or integration, please contact your local service center.
• Do not leave your OPS Module under direct sunlight.
If your OPS Module does not operate normally, having followed the instructions set out in this document, please contact a technician or
your local service center.
