8
EN
2
Connect the antenna and amplifier as
illustrated, if applicable.
Connector
Connect to
1 ANTENNA
Antenna
2 Socket for ISO male
connectors
As indicated in
Step 1 above
3 REAR LINE OUT R
(Socket)
Rear right speaker
4 REAR LINE OUT L
(Socket)
Rear left speaker
5 OE REMOTE
(Purple)
OE Remote
Tip
•
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the unit.
Mount into the dashboard
•
If the car does not have an on-
board drive or navigation computer,
disconnect the negative terminal of the
car battery.
•
If the car battery is not disconnected, to
avoid short-circuit, make sure that the
bare wires do not touch each other.
1
Ensure that car dashboard opening is
within these measurements:
2
Remove the mounting sleeve with the
supplied disassembly tools.
3
Install the sleeve into the dashboard and
bend the tabs outward to fix the sleeve.
183 mm
53mm
5mm
183 mm
53.5 mm
