9
Connect the woofer/tweeter to the network
Note
Match the “left”, “right”, “+” and “-” terminals correctly. Revised polarity may degrade sound quality.
•
Two 4-ohm speakers, wired in stereo, present a 8 ohm load to each channel of the amplifier. Most two
•
channel amplifiers work well in this configuration. However, if two 4-ohm speakers, wired in parallel to a
bridged two -channel amplifier, present a 2-ohm mono load to the amplifier. Most 2-channel amplifiers do
not support 2-ohm mono operation! Amplifier damage may result!
1
Connect the woofers and the tweeters to the 2-way crossover network first, then connect the
network to your amplifier or car audio directly.
White lined
White lined
White lined
Amplifier
Network
Woofer
Tweeter
Black
Black
Black
English
EN
Содержание CarStudio CEM1100
Страница 23: ... 2011 Koninklijke Philips Electronics N V All rights reserved CEM1100_IFU_00_V2 0 ...
Страница 24: ...Register your product and get support at www philips com welcome EN User manual CSP550 CSP650 CSP652 ...
Страница 34: ... 2009 Koninklijke Philips Electronics N V All rights reserved Document order number CSP550_55_UM_V2 1 ...