Philips CarStudio CEM1100, Руководство пользователя

Страница: 11 / 34

12
7
Reconnect the negative terminal of the car
battery.
Attach the front panel
1
Attach the trim plate.
2
Insert the right side of the panel in the
chassis until it is correctly engaged.
3
Press the left side of the panel until the
mechanism locks it into place.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat,
=<
Risk of decreased battery life! Never mix different
brands or types of batteries.
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
5
Place the supplied rubber cushion over the
end of the mounting bolt.
6
Slide the unit into the dashboard until you
hear a click sound.
183 mm
53.5 mm
EN