Philips CarStudio CEM1100, Руководство пользователя

Страница: 10 / 34

11
English
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lose its memory.
If the car battery is not disconnected,
to avoid short-circuit, ensure that the
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
3
Remove the mounting sleeve with the
supplied disassembly tools.
4
Install the sleeve into the dashboard and
;<
Note
*%;<
screws, skip this step.
183 mm
53mm
5mm
Connector Connect to
1 ANTENNA Antenna
2 FRONT LINE OUT R
(Socket) Front right
speaker
3 FRONT LINE OUT L
(Socket) Front left
speaker
4 REAR LINE OUT R
(Socket) Rear right
speaker
5 REAR LINE OUT L
(Socket) Rear left
speaker
6 OE REMOTE (Purple) OE Remote
7 TEL MUTING (Blue) To cellular
phone
system
8 REAR AUX LINE
OUT R (Socket) Rear Aux
right
9 REAR AUX LINE
OUT L (Socket) Rear Aux left
Tip
The pin arrangement for the ISO connectors depends
on the type of vehicle you drive. Be sure to make
proper connections to prevent damage to the unit.
Mount into the dashboard
1
If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
5($5
)5217
5
/
5( $5$8; /
5
5
/
8
9
7
9
EN