English
9
29
Preparations
Rear connections
The type plate is located at the rear of the
system.
For users in the U.K.: please follow the
instructions on page 2.
Power
– Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNING!
– For optimal performance, use only the
original power cable.
– Never make or change any connections
with the power switched on.
To avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may switch to Standby mode
automatically under extreme conditions. If
this happens, let the system cool down
before reusing it
(not available for all versions)
.
Antenna Connection
FM Antenna
The wire antenna supplied can only be used to
receive nearby stations. For better reception we
recommend using a cable antenna system or an
outdoor antenna.
1
Extend the wire antenna and fit it to FM
ANTENNA as shown below.
Note:
– If you are using a cable antenna system or an
outdoor antenna, fit the antenna plug, instead of
the wire antenna, to FM ANTENNA .
Speaker
(right)
Speaker
(left)
FM wire antenna
Power adaptor
PG 001-028_BTM177_12-Eng
2/29/08, 16:00
9
