20
English
Listening to an external source
You can listen to the sound of the connected
external device through your system’s speakers.
Using AUX IN (3.5 mm jack )
1
Use a cinch cable (not supplied) to connect
AUX IN
jack of the main unit (3.5 mm, located
on the back panel) to an AUDIO OUT or
headphone jack on an external equipment (such
as CD player, or VCR).
2
Press
SOURCE
(or
AUX
on the remote
control) repeatedly until “AUX 1” is displayed.
Using AUX IN 2 (white/red jacks)
1
Use the audio cables (white/red, not supplied) to
connect
AUX IN 2 (L/R)
jacks of the main unit
(located on the back panel ) to the
corresponding AUDIO OUT jacks on an
external device (such as TV or VCR).
2
Press
SOURCE
(or
AUX
on the remote
control) repeatedly until “AUX 2” is displayed.
Note:
– To connect equipment with two AUX OUT (left/
right) terminals, you can use a “single to double”
cinch cable (not supplied).
AUX
PG 001-028_BTM177_12-Eng
2/29/08, 16:01
20
