English
13
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Plug and Play
(for tuner installlation)
Plug and Play allows you to store all available
radio stations automatically.
First time setup/power up
1
When you turn on the main supply, "
AUTO
INSTALL PRESS
-
PLAY KEY
" is displayed.
2
Press
ÉÅ
on the system to star t installation.
➜
"
PLUG AND PLAY
" .... "
INSTALL
" is
displayed, followed by "TUNER" and "AUTO".
➜
PROG
starts flashing.
➜
The system will automatically store the radio
stations (FM only ) with sufficient signal strength.
➜
When all the available radio stations are
stored or the memory for 40 presets are used,
the last preset radio station will be played.
To reinstall Plug and Play
1
In standby mode, press and hold
ÉÅ
on the
system until "
AUTO INSTALL PRESS
-
PLAY
KEY
" is displayed.
2
Press
ÉÅ
again to start installation.
➜
All previously stored radio stations will be
replaced.
To exit without storing the Plug and Play
●
Press
9
on the system.
➜
If you do not complete the Plug and Play
installation, the function will be restarted when
you next turn on the main supply again.
Notes:
– If no stereo frequency is detected during Plug
and Play, "PLEASE CHECK ANTENNA" will be
displayed.
PG 001-028_BTM177_12-Eng
2/29/08, 16:01
13
