14
English
Basic Functions
Adjusting volume and sound
1
Turn the
VOLUME
control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press
VOL
-
/
+
on the remote
control).
➜
Display shows the volume level
VOL
and a
number from 1-31.
2
Press
DSC
repeatedly to select the desired
sound effect:
POP
/
JAZZ
/
ROCK
/
CLASSIC
.
3
Press
DBB
on the remote control to switch
bass enhancement on or off.
➜
Display shows if the DBB is activated.
4
Press
LOUD
on the remote control to enable/
disable LOUDNESS feature.
●
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
5
Press
MUTE
on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press
MUTE
again;
– adjust the volume controls;
– change source.
Notes:
– The current DSC setting is shown when DSC
button is pressed once.
– When DBB is on, LOUDNESS feature will be
turned off automatically.
– When LOUDNESS feature is on, the DBB will be
turned off and the DSC setting will be changed to
CLASSIC automatically.
To listen through the headphone
●
Connect the headphone plug to the
n
socket
on the rear of the set.
➜
The speakers will be muted.
Switching the system on
●
Press
STANDBY ON
or
SOURCE
(or
2
on
the remote control).
➜
The system will switch to the last selected
source.
●
Press
CD
,
USB
,
FM, Bluetooth
or
AUX
on
the remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press
STANDBY ON
on the system (or
2
on
the remote control).
➜
The display displays clock time, or
--
:
--
is
displayed if clock time is not set.
➜
The backlight for clock display is dim in
standby.
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
To switch the system to Eco-power
standby mode
●
Press and hold
STANDBY ON
(
y
on the
remote control) for more than 2 seconds.
➜
The display will go blank.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD/USB playback
has ended and no control is operated.
PG 001-028_BTM177_12-Eng
2/29/08, 16:01
14
