26
English
Troubleshooting
Problem
Solution
The system does not respond
–
Confirm the source switch location. Some
when the buttons are pressed.
buttons/knob/keys are available only in the
related mode (for example cassette recorder
keys is available only in TAPE mode.).
–
Disconnect the power plug from the jack, and
insert again.
The language subtitle cannot be
–
Multi-language subtitle is not recorded on the
changed when playing a DVD.
DVD.
–
Changing the language for subtitle is prohibited
on the DVD.
Sound cannot be heard or is of
–
Adjust the volume.
poor quality
–
If the system is in pause, slow motion or fast
forward/reverse mode, press
2;
to resume the
normal play mode.
–
Make sure the MP3-CD was recorded within 32-
256 kbps bit rate with sampling frequencies at 48
kHz, 44.1 kHz or 32 kHz.
Poor radio reception.
–
If the signal is too weak, adjust the antenna
for better reception.
–
Increase the distance between the System and
your TV set or VCR.
Recording or playback cannot be made
–
Clean deck parts, see “Maintenance”.
–
Use only NORMAL tape.
–
Apply a piece of adhesive tape over the missing
tab space.
The tape deck door cannot open
–
Remove and reconnect the AC power plug and
switch on the system again.
The remote control does not
–
The remote control is available in disc mode only.
function.
–
Point the remote control at the remote control
sensor of the unit.
–
Reduce the distance to the player.
–
Remove any possible obstacles.
–
Replace the batteries with new ones.
–
Check that the batteries are loaded correctly.