25
En
g
lish
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
No power.
–
Check if the AC power cord is properly
connected.
“
”
is displayed.
–
Insert a disc.
–
Check if the disc is inserted upside down.
–
Wait until the moisture condensed at the lens
has cleared.
–
Replace or clean the disc, see “Maintenance”.
–
Use a readable disc or correctly recorded format
MP3-CD.
No picture on TV screen.
–
Select the appropriate video input mode on the
TV set.
–
Check if the TV set is switched on.
–
Check the video connection.
–
Check if the system is securely connected.
No colour on TV
–
TV has a colour system standard. If the disc’s or
DVD system’s colour system is different than
your TV’s colour system, the picture may be
distorted or colourless.
–
Change the system t the respective PAL or
NTSC setting.
Distorted or poor picture.
–
Sometimes a slight picture distortion may appear.
This is not a malfunction.
–
Clean the disc.
The aspect ratio of the screen
–
The aspect ratio is fixed on the DVD disc.
cannot be changed even though
–
The aspect ratio may not be changed for some
you have set the TV shape.
TV systems.
The DVD player does not
–
Check the source switch on the disc mode.
start playback.
–
Insert a readable disc.
–
Check the disc type, color system and region
code.
–
Clean the disc.
–
Place the disc with the playback side down.
–
Press
SYSTEM MENU
to turn off the setup
menu.
–
Cancel the parental control rating function or
change the rating level.
–
Moisture has condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
Troubleshooting
