Basic Function/ Radio
Basic functions
Switching on/off the set
1
To switch on, press
POWER
.
➜
Display lights up.The system will switch to
the last selected source.
2
To switch off, press
POWER
again.
➜
Display lights off.
Adjusting volume and sound
Adjust the sound with the
VOLUME
and
DBB
controls.
Digital tuner
Tuning to radio stations
1
Press repeatedly
SOURCE
(or
TUNER
on
the remote control) to select
FM
or
MW
.
➜
“TUNER” is displayed briefly, then the
radio station frequency, waveband and, if
programmed, a preset number are shown
(See
2
).
2
Press and hold
∞
or
§
until the frequency in
the display starts running.
➜
The radio automatically tunes to a station
of sufficient reception. Display shows
“
SEARCH” during automatic tuning.
3
Repeat step 2 if necessary until you find the
desired station.
•
To tune to a weak station, press
∞
or
§
briefly and repeatedly until you have found
optimal reception.
To improve radio reception:
•
For
FM
,
extend, incline and turn the tele-
scopic aerial. Reduce its length if the signal is
too strong.
•
For
MW
,
the set uses a built-in aerial. Direct
this aerial by turning the whole set.
Programming radio stations
You can store 15 FM and 10 MW radio
stations in the memory manually or
automatically (Auto store).
Manual programming
1
Tune to your desired station (see
Tuning to
radio stations
).
2
Press
PROG
to activate programming
.
➜
Display:
PROG
flashes.
3
Press
ALBUM//-
(
ALBUM/PRESET
3
,
4
on the remote
control ) once or more to allocate a number
(FM: from 1 to 15; MW: from 1 to 10).
4
Press
PROG
to confirm.
5
Repeat steps 1-4 to store other stations.
Helpful hints:
–
You can erase a preset station by storing
another frequency in its place.
Autostore
Autostore automatically starts programming
radio stations from preset 1. Any previous
presets e.g. manually programmed will be
erased.
1
Press repeatedly
SOURCE
(or
TUNER
on
the remote control) to select
FM
or
MW
.
2
Press
PROG
until “AUTO” flashes
.
➜
Available stations are programmed (MW
or FM). After all stations are stored, the
first autostore preset station will then
automatically play.
To listen to a preset or autostore
station
Press the
ALBUM//-
(
ALBUM/PRESET
3
,
4
on the remote
control ) buttons once or more until the
desired preset station is displayed.
IFU_AZ3830_latam_ENG 2006.11.24 11:14 Page 7
