9
EN
English
Changing the mode setting
You can choose Auto mode, Turbo mode or the Sleep mode by touching the
button�
Auto mode ( ):
In Auto mode, the dual-sensor sense the air quality in real-
time and the appliance automatically adjusts the fan speed in accordance
with the ambient air quality, the control panel can automatically adjust display
screen brightness according to the ambient light (fig
i
)�
Turbo mode ( ):
In Turbo mode, the air purifier operates on the highest
speed (fig
j
)�
Sleep mode ( ):
In Sleep mode, the air purifier operates quietly at a low
speed� After 3 seconds, the screen dims (fig
k
)�
Switching the display indicator
Note:
The appliance displays IAI level by default�
•
Touch the button to switch display indicator among PM2�5 /Gas /IAI
(fig
l
& fig
m
& fig
n
)�
Using the light on/off function
With the light sensor, the control panel can automatically turn on, turn off or
dim according to the ambient light� The control panel will be off or dim when the
ambient light is dark� You can touch any button to wake up all lights� Then, if no
further operation, all lights will be off or dim again to match with the ambient
light (fig
o
)�
You can touch the light on/off button manually to turn off all lights and the
control panel� Touch any button to wake up all lights (fig
p
)�
Checking the filter status
•
Touch the filter status check/reset button to check the filter service life
status (fig
q
)�
»
The percentage of remaining service life of the filter displays on the
screen�
Icon color
Filter life indication
Display (%)
Blue
Optimal service life
16-100
Blue-purple
Good service life
9-15
Purple-red
Service life almost reaches the end
4-8
Red
Service life ends, replace the filter
0-3
Note:
The appliance goes back to normal display if no operations after
3 seconds�
