Philips 55BDL4107X Скачать руководство пользователя страница 17

Страница: 17 / 53

55BDL4107X

2.3. Package Contents

Please verify that you received the following items with your package content:

• LCD display
• Remote control with AAA

batteries

•  Quick start guide
•  Power cord
•  Display Port Cable
•  IR sensor cable
•  Edge Alignment Kit-1: 1PCS
•  Edge Alignment Kit-2: 2PCS
•  Edge Alignment Pin: 2PCS
•

DB9(female) to RJ12/45 adaptor

•

RJ45 cable for daisy chain

•  AC Switch Cover
•  Wire Clamper: 3 PCS
•  Gap Mylar: 3 PCS

* The supplied power cord varies depending on destination.

LCD Display

IR Sensor Cable

Edge Alignment Pin

X 2 PCS

AC Switch Cover

Wire Clamper

X 3 PCS

Gap Mylar X 3 PCS

Power Cord

Edge Alignment Kit-1

Edge Alignment Kit-2

X 2 PCS

Display Port Cable

DB9(female) to

RJ12/45 adaptor

RJ45 cable

for daisy chain

Remote Control

and AAA Batteries

Quick start guide

* Differences according to regions.
Display design and accessories may differ from those illustrated above.

NOTES:
• For all other regions, apply a power cord that conforms to the AC voltage of the power socket and has been approved by and

complies with the safety regulations of the particular country.

• You might like to save the package box and packing material for shipping the display.

2.4. Installation Notes

• Only use the power cable provided with this product. If an extension cord is required, please consult your service agent.
•

The product should be installed on a flat surface, or the product may tip over. Leave a space between the rear of the product

and the wall for proper ventilation. Do not install the product in a kitchen, bathroom or a place exposed to moisture, failure to

do so may shorten the life of the internal parts.

• Do not install the product where it is 3000m and higher in altitude. Failure to do so may result in malfunctions.

Содержание 55BDL4107X






















































Результаты поиска

Содержание 55BDL4107X

Отзывы:

Похожие инструкции для 55BDL4107X

Бренды по названию

Популярные бренды

Philips 55BDL4107X, Руководство пользователя

Результаты поиска

Содержание 55BDL4107X

Отзывы:

Похожие инструкции для 55BDL4107X

Бренды по названию

Популярные бренды