Philips 49PUS7101, Руководство пользователя

Страница: 30 / 106

used to.
To open these settings…
Press

HOME , select All Settings and press OK .
5 - Select Android Settings and press OK .
6 - Select Preferences >

Keyboard and
press OK .
7 - Select Configure > Language and press OK . You
can set your language keyboard layout here.
8 - Press

BACK to close the menu to go back
one step.
• Best distance to operate remote control with the TV
is less than 5 m.
• When using remote control keyboard, best to hold
the remote control with the angle less than 50
degree.
• Do not block the IR ray of the remote control.
Uppercase and Lowercase
To type an uppercase character, press the

(Shift)
key just before you type the character.
To type several uppercase characters consecutively,
press and hold the

key while typing.
To type uppercase constantly, press the

key for
2 seconds to switch the keyboard in uppercase mode.
To switch out of uppercase mode, press the

key
again. If no keys are pressed for 20 seconds, the
uppercase mode switches off automatically. Also, if
you press another modifier key, like
Fn or Ω , you
switch out of uppercase mode.
Numbers and Punctuation Characters
To type a number or punctuation character, press
the
Fn key just before you type the number or
punctuation character you need. You can switch the
Fn mode on or off as you do for the uppercase mode.
Internet
You can use the Fn key to enter www. or .com .
Accented Letters and Symbols
Accented characters and symbols are not directly
available on the Remote Control Keyboard.
To type such a character, you can open the onscreen
keyboard.
Qwerty, Azerty and Cyrillic keyboard
The standard layout of the Remote Control Keyboard
is Qwerty.
Azerty keyboard
Depending on your region, the Remote Control
Keyboard can be set to Azerty. The Azerty characters
are shown at the top right of the relevant keys.
To set the keyboard layout to Azerty…
1 - Press

, select All Settings and press OK .
2 - Select Region and Language and
press

(right) to enter the menu.
3 - Select Remote Control Keyboard and
press OK .
4 - Select AZERTY or QWERTY and press OK .
5 - Press

(left) repeatedly if necessary, to close
the menu.
Cyrillic keyboard
Depending on your region, the Remote Control
Keyboard can be switched to Cyrillic characters.
The Cyrillic characters are shown at the top right of
the keyboard keys.
To write Cyrillic characters…
1 - Press

on the remote control.
2 - Press

again to switch back to Qwerty.
6.3
IR Sensor
The TV can receive commands from a remote control
that uses IR (infrared) to send commands. If you use
such a remote control, always make sure you point
the remote control at the infrared sensor on the front
of the TV.

Warning
Do not put any objects in front of IR sensor of the TV,
it may block the IR signal.
6.4
Batteries
If the TV does not react on a key press on the remote
control, the batteries might be empty.
To replace the batteries, open the battery
compartment on the front-bottom of the remote
control.
1 - Slide the battery door in the direction shown by
the arrow.
2 - Replace the old batteries with 2
type AAA-R03-1.5V batteries. Make sure the + and
the - ends of the batteries line up correctly.
30