2
Setting up
2.1
Read safety
Read the safety instructions first before you use the
TV.
In Help, go to
Safety and care
>
Safety
.
2.2
TV stand and wall mounting
TV stand
You can find the instructions for mounting the TV
stand in the Quick Start Guide that came with the TV.
In case you lost this guide, you can download it from
www.philips.com
.
Use the product type number of the TV to look for the
Quick Start Guide to download.
Wall mounting
Your TV is also prepared for a VESA-compliant wall
mount bracket (sold separately).
Use the following VESA code when purchasing the
wall mount . . .
To fix the bracket securely, use screws with a length
indicated in the drawing.
- 43PUx4900 - VESA MIS-F 200x200, M6 (Minimum
10 mm, Maximum 15 mm)
- 49PUx4900 - VESA MIS-F 400x200,
M6 (Minimum 10 mm, Maximum 15 mm)
- 55PUx4900 - VESA MIS-F 400x200, M6 (Minimum
10 mm, Maximum 15 mm)
Caution
Wall mounting the TV requires special skills and
should only be performed by qualified personnel. The
TV wall mounting should meet safety standards
according to the TV's weight. Also read the safety
precautions before positioning the TV.
TP Vision Europe B.V. bears no responsibility for
improper mounting or any mounting that results in
accident or injury.
2.3
Tips on placement
- Position the TV where light does not shine directly
on the screen.
- Position the TV up to 15 cm away from the wall.
- The ideal distance to watch TV is 3 times its
diagonal screen size. When seated, your eyes should
be level with the centre of the screen.
2.4
Power cable
- Insert the power cable into the
POWER
connector
on the back of the TV.
- Make sure the power cable is securely inserted in
the connector.
- Make sure that the power plug, in the wall socket, is
accessible at all times.
- When you unplug the power cable, always pull the
plug, never pull the cable.
Although this TV has a very low standby power
consumption, unplug the power cable to save energy
if you do not use the TV for a long period of time.
2.5
Antenna cable
Insert the antenna plug firmly into the
ANTENNA
socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
4
Содержание 4900 series
Страница 14: ...14 ...
Страница 62: ...Index 62 ...
Страница 63: ...Powered by TCPDF www tcpdf org 63 ...