Philips 42PFT6509, Руководство пользователя

Страница: 28 / 81

To start an update yourself . . .
1 - Press  and select Setup and press OK .
2 - Select Search for channels and press OK .
3 - Select
Update channels
and follow the instructions on
screen. The update may take a few minutes.
In certain countries, the Automatic channel update is done while
watching TV or any moment when the TV is in standby.
New channels
New channels added with the automatic channel update are
easy to find in the channel list
New . The same new channels are
also stored in the
All
or
Radio
channel list.
New channels are kept in the channel list New as long as you
don't mark them as a favourite or tune to them.
Reinstall channels
You can search for and reinstall channels and leave all other TV
settings untouched. Alternatively, you can do a full new TV
installation.
If a child lock code is set, you will need to enter this code before
you can reinstall channels.
Reinstall channels
To reinstall the channels only . . .
1 - Press  and select Setup and press OK .
2 - Select Search for channels > Re-install channels and press
OK .
3 - Select the country where you install the TV.
4 - Select Antenna (DVB-T) or Cable (DVB-C) . The channel
search may take a few minutes. Follow the instructions on
screen.
Full installation
To redo a full TV installation . . .
1 - Press

and select
Setup
and press
OK
.
2 - Select TV settings > General settings > Reinstall TV and
press OK . The installation may take a few minutes. Follow the
instructions on screen.
Factory settings
Factory settings sets the TV back to the original TV settings for
picture and sound. To switch back to the original Factory
settings . . .
1 - Press  and select Setup and press OK .
2 - Select
TV settings
>
General settings
>
Factory
settings and press OK .
3 - Press OK to confirm.
4 - Press  , repeatedly if necessary, to close the menu.
Channel list copy
Introduction
Channel list copy is intended for dealers and expert users.
With Channel list copy , you can copy the channels installed on
one TV onto another Philips TV of the same range. With
Channel list copy, you avoid the time-consuming channel search
by uploading a predefined channel list on a TV. Use a USB flash
drive of minimum 1 GB.
Conditions
• Both TVs are from the same year range.
• Both TVs have the same hardware type. Check the hardware
type on the TV type plate on the back of the TV. Typically
noted as Q . . . LA
• Both TVs have compatible software versions.
Current version
You can check the current version of the TV software
with
Current software info in  > Setup > Software settings .
Copy channel list
To copy a channel list . . .
1 - Switch on the TV which has its channels installed. Plug in a
USB memory device.
2 - Press  and select Setup and press OK .
3 - Select TV settings > General settings > Channel list copy >
Copy to USB and press OK . To copy the channel list from this
TV, you might be asked to enter the Child lock code you
entered during the installation.
4 - When copying is done, unplug the USB memory device.
Now you can upload the copied channel list onto another
Philips TV.
Upload channel list
Upload a copied channel list
Depending on whether your TV is already installed or not, you
must use a different way to upload a channel list.
To a TV that is not yet installed
1 - Plug in the power plug to start the installation and select
language and country. You can skip Search for channels. Finish
the installation.
2 - Plug in the USB memory device that holds the channel list of
the other TV.
3 - To start the channel list upload, press  and
select Setup and press OK .
4 - Select TV settings > General settings > Channel list copy >
Copy to TV and press OK . You might be asked to enter the
Child lock code of this TV.
5 - The TV notifies you if the channel list is copied to the TV
28