Administrator’s E-mail Address:
Set the administrator’s e-mail address.
Initialize Flash Info
: The administrator initializes almost all the information
saved on flash memory. However ‘Date & Time’, ’Model’, and ‘Serial Number’
in ‘System’ menu, ‘IP configuration’ in ‘Network’ menu, and all items in ‘Video’
menu are not initialized.
Rebooting
: If NetCam4 has any problem, you can reboot
without switching off the power supply. This button works
as on/off switch.
4.2.2
User Configuration
Allows you to configure IDs and passwords of an administrator and 5 users. If
you want to open your NetCam4 to everyone, you may not change IDs and
passwords of users. However you should change administrator’s ID and password
with unique names (max. 9 characters).
It is possible to give and forfeit authorities for users to control pan/tilt/zoom and
to control video with such conditions as quality options, QBOX settings, etc.
Administrator has full authorities to give a certain user a right to control or not.
4.2.3
Network Configuration
You can set the IP address, Network Mask, Broadcast address, Gateway address,
and DNS addresses. By clicking ‘Get From Netmask’ button after assigning the
IP address and Network Mask address, the broadcast address is to set
automatically.
29
NetCam4
Section 4
NetCam_ii_99011_0047.qxd 12/13/00 1:55 PM Page 29
