Base station
40
Service code settings
When you subscribe to extra services with your operator you may need to set some codes in your
phone.
The default codes are the codes used by the main national network operator.
If you subscribed to another operator you may need to change the codes.
Contact your network operator for more information on the services (see page 35).
To change a service code
1- Go to
Base station
, validate
2- Scroll to
Service code settings
, validate
3- Select the appropriate service, validate
4- Select
Change
and enter the new code and validate
To change the operator type (country dependent)
1- Go to
Base station
, validate
2- Scroll to
Line settings
, validate
3- Scroll to
Operator type
, validate
4- Select among the suggested types and validate
Note : Useful if the Caller Display service does not work when you
subscribed to that service.The default setting is type 1.
To activate/deactivate the first ring
To prevent the phone from ringing when receiving an SMS, the first ringer is
deactivated.You can activate it.
1- Go to
Base station
, validate
2- Scroll to
Line settings
, validate
3- Scroll to
First ring
, validate
4- Select
ON/OFF
, validate
Onis 380 master UK_indice2.qxd 18/08/03 10:04 Page 40
