Philips 380 Vox Скачать руководство пользователя страница 7

Страница: 7 / 48

Installing the phone

Installing the base station

To properly install the base station, plug the line cord and the

power cable into the base station. Plug the cord and the cable

into the wall socket.The green indicator on the base station

indicates that the phone is properly installed.

Warning !

The electrical network is classified as dangerous

according to criteria in the standard EN 60-950.The only way

to power down this product is to unplug the power supply

from the electrical outlet. Ensure the electrical outlet is located

close to the apparatus and is always easily accessible.

Warning

:Always use the cables provided with the product.

Installing and replacing the batteries

To insert the batteries, open the battery cover, place the

batteries as indicated and put the battery cover back.When the

handset is placed on the base, the 3 battery bars scroll (if

charge is needed).Allow the handset to charge for 24 hours to

reach full charge. On first use it may be necessary to wait for a

few minutes before seeing symbols on the display.

In case you need to change the batteries, the following type is

mandatory R03/AAA NiMh 600/650 mAh.

Warning

: It is advisable to plug the base station into the mains

when charging. Always use rechargeable batteries.

Battery life and range

The battery life is about 250 hours in stand by time (when the handset is in idle mode & ready to receive

a call) and around 16 hours in communication. A low battery alert will inform you that the handset has

to be charged, if this is during a call, the call will end shortly after the alert.

Optimal battery life is reached after 3 cycles of full charge/discharge.

Under ideal conditions the range is a maximum of 50 meters indoors and 350 meters outdoors.When

reaching the range limit, the conversation will become crackly, move closer to the base station otherwise

the call will be cut off.To reach optimal range place the base station away from electrical appliances.

Do not insert anything in this opening

Batteries should not be disposed of with general household waste.

Onis 380 master UK_indice2.qxd 05/08/03 12:07 Page 6

Содержание 380 Vox

















































Результаты поиска

Содержание 380 Vox

Отзывы:

Похожие инструкции для 380 Vox

Бренды по названию

Популярные бренды

Philips 380 Vox, Руководство пользователя

Результаты поиска

Содержание 380 Vox

Отзывы:

Похожие инструкции для 380 Vox

Бренды по названию

Популярные бренды