Studio 24/26HFL2808D/12
P a g e
| 25
Enter Service Menu
It is only possible to enter the Service
Menu if the Hotel Mode is disabled,
Hotel Mode set to <Off>.
If enabled, open the Hotel TV Menu
and set Hotel Mode to Off.
To enter the Service Menu:
press Menu key
press key sequence:
<1><2><3><6><5><4>
All items are unselectable under the Service Menu
The software version number will shown as
VES11E_x.y.z
Enter MultiRC Menu Feature to program a RC
to pair to a TV
To enter the MultiRC Menu:
(press Menu key)
press key sequence:
<RETURN><1><2><3><4>
On the TV a menu will guides you to select desired
TV. Press relevant key and then press OK key to
finish the programming.
Enter MultiRC Menu Feature to reset the
RC/TV
To enter the MultiRC Menu:
(press Menu key)
press key sequence:
<RETURN> <4><3><2><1>
On the TV you will see a dialog, “Reset OK?” Press
OK key to reset the system. After resetting, the
system will return to the factory default.
Store in a
welcome_image
directory on a USB
device a picture file with the name:
hotel_wel.png
.
<USB>:/welcome_image/hotel_wel.png
Picture characteristics:
Name + extension
Hotel_wel.png
Resolution
960h x 540v
Note:
For the welcome picture, there is a color lookup
table used that is limiting the number of colors
available to display. This can result in certain display
color artifacts and using a limited number of different
color values can improve this.
The picture can be loaded into the TV using the
Copy from USB
command in the Hotel TV Menu.
In the Hotel TV Menu, set the entry:
Welcome
Screen <On>
Once this feature is configured and set the welcome
image will be displayed within 8 seconds after switch
on. This page will remain until a key on the RC is
pressed.
HotelTV Options
Service Menu
MultiRC setup
Welcome Picture
