32
English
7 Useful tips
FAQ
Question
Answer
My remote control does not
work.
What should I do?
• Check the antenna or cable connection to the main unit.
• Check the batteries of the remote control.
• Check if there is an obstacle between the infrared sensor window and the remote control.
• Test the signal Output use
IR Signal Check
.
p. 36
If okay, then possible infrared sensor trouble.
• Aim the remote control directly at the infrared sensor window on the front of the unit.
• Reduce the distance to the unit.
• Re-insert the batteries with their polarities (+/–) as indicated.
• When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote control signal of this
unit. Movethe infrared-equipped device away from this unit, change the angle of the infrared sensor or Turn Off the
infrared communication function.
How come the initial setup
appears every time I Turn
On this unit?
• Make sure to complete the initial setup before the unit goes into Standby mode.
Why can I not watch some
RF signal TV programs.
• Autoprogram must be completed when you set up the unit for the first time or move it to a location where
previously unavailable channels are broadcast.
• Make sure
Autoprogram
has been completed.
p. 21
• The selected channel may not be broadcasting.
• When
Autoprogram
is interrupted and not completed, some channels will not be received. Make sure to complete
the
Autoprogram
.
p. 21
• The selected channel cannot be viewed by the
Child lock
setting.
p. 23
• The unit requires some kind of antenna Input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital
or VHF / UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit.
How come there is no image
from the connected external
devices?
• Check if the correct Input mode is selected by pressing
SOURCE
.
Watching channels from an external device
p. 16
• Check the antenna, cable or other Input connection to the unit.
• When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors
are connected to their corresponding colored jacks on the unit.
When I enter a channel
number, it changes
automatically.
• Many Digital channels have alternate channel numbers.The unit changes the numbers automatically to the ones
signifying the broadcasting station channel number.These basic numbers used for previous Analog broadcasts. (e.g.,
Input ch# 30 automatically changes to ch# 6.1)
Why are captions not
displayed entirely? Or,
captions are delayed behind
the dialog.
• Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate,
selective editing is used to insure that the captions remain up-to date with the current TV screen dialog.
How can I set the clock ?
• There is no clock function on this unit.
I cannot change the Child
lock setting because my PIN
code no longer works.
• Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN
code in
Child lock. p. 23
When you forget your PIN code, enter 9999 in
Change PIN
to reset the PIN code.
p. 25