The SW installation in MST182 chassis can be done with USB in two
procedures.
A) Set in Stand by condition by USB.
B) In Set ON condition by USB.
Sr.
No.
STEPS
PHOTOS
A
Copy the SW .bin file from computer to
Root of our USB drive.
B
Rename the SW .bin File as
PHILIPS.bin.
C
Keep the set in Mains Power OFF
condition.
D Plug in the USB drive In USB port of
E
Now Plug in the Mains Power of LCD.
F
The RED LED indicator will glow.
G
After 2-3 Sec. the LED will Start Blinking
H
After few Seconds, the LED blinking will
stop and set will be released from
Stand by i.e. will become ON.
C) SW loading with M-STAR tool
13
3. Software Upgrade Procedure
SW installation in Stand By Condition by USB
A)
