A
Go to Design Menu by Pressing
MENU => 1 9 5 0
B
Go to Setup design menu and Select
Clear EEPROM option and press OK key
of remote.
C
After Clear EEPROM, the set will go to
stand by and will again restart
automatically in RF source.
D
Then verify the modelwise Audio/
Video settings as per Design data.
Verify the SW date and version in
Version info menu of Design data
E
Then press Shipping in Setup design
menu by pressing OK key of remote,
then Switch OFF and again Switch ON
the SET. The SW loading process Is
complete.
Step to refer after software installation -
20
