Philips 22PFL3805H, Руководство пользователя

Страница: 16 / 55

14
Change general settings
1
Press DVD SETUP .
2
Select [General setup] , then press OK
3
Select and adjust the following settings,
and then press OK to confirm:
• [TV display] : Selects a picture display
format to fit the TV screen. (only available
when the disc is not playing)
•
[4:3 Panascan] : For 4:3 screen TV.
Full-height display with trimmed
sides.
• [4:3 Letter Box] : For 4:3 screen TV.
Wide-screen display with black bars
on the top and bottom of the screen.
• [16:9] : For wide-screen TV. The
display ratio 16:9.
• [Menu language] : Selects the on-
screen display menu language. Due to
specification differences, the number
of menu languages available on the disc
player varies from that on the TV.
• [Screen saver] : Enables or disables screen
saver mode. If enabled, the screen enters
idle mode after 5 minutes of inactivity
(for example, in pause or stop mode).
• [Disc lock] : Selects [On] to lock the disc
in the disc compartment. If locked, you
need to enter the password to access the
disc every time you play the locked disc.
• [Last memory] : Enables or disables last
memory option. If enabled, the player
automatically resumes play from the last
stop point.
Note
Press • DVD SETUP to exit menu.
Switch camera angles
This feature is only available for DVDs
recorded with multiple camera angles. This
allows you to view the picture from different
angles.
1
During video play, press GOTO .
2
Select [Angle] , then press OK .
3
Press the Numeric buttons to select the
available camera angles.
Playback skips to the selected angle.
»
4
Press GOTO to exit.
Change settings
This section helps you to change the settings of
the disc player.
Caution
Most of the settings are already configured •
with the best value for the disc player. Unless
you have a specific reason to change a setting,
it is best to leave it at the default value.
Access the setup menu
1
Press DVD SETUP .
• [General setup] : Accesses general
settings of the disc player.
• [Audio setup] : Accesses audio
settings of the disc player.
• [Preference] : Customise your
preferred settings.
2
Select a setup menu, then press OK .
See the following sections for information
about how to change the settings of the
disc player.
3
Press DVD SETUP to exit.
Note
You cannot change a setting that is greyed out.
•
If you select an output that is not available on
•
the disc, the default setting is used.
EN