manualshive.com logo in svg

Philips 150P, Электронное руководство пользователя, Страница: 48 / 102

Поделиться
Скачать
Philips 150P Скачать руководство пользователя страница 48

One lit red, green or blue
subpixel

Two adjacent lit subpixels:
- Red + Blue = Purple
- Red + Green = Yellow
- Green + Blue = Cyan (Light Blue)

Three adjacent lit subpixels (one
white pixel)

Black Dot Defects 

Black dot defects appear as pixels or subpixels that are always dark or "off". These are

the types of black dot defects:

One dark subpixel

Two or three adjacent dark subpixels

Proximity of Pixel Defects

Because pixel and subpixels defects of the same type that are nearby one another may be more noticeable,
Philips also specifies tolerances for the proximity of pixel defects.

 

Pixel Defect Tolerances

In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT LCD
panel in a Philips flat panel monitor must have pixel or subpixel defects exceeding the tolerances listed in
the following tables.

Philips Pixel Defect Policy

file:///E|/manual/english/150P/product/pixel.htm (2 of 3) [12/13/1999 8:00:56 PM]

Содержание 150P







































































































Отзывы:

Нет отзывов