- 17 -
2. Plug the socket end of the AC power cord
into the power supply
4
.
3. Plug the pronged end of the AC power cord
into an electrical outlet that is not controlled
by a wall switch
5
.
4. Verify that the plug on the bottom of the
device, at the power supply, and at the
electrical outlet are fully inserted. This
will help to ensure that a secure, reliable
electrical connection has been made.
Important: To remove AC power, disconnect the power supply cord from the
electrical outlet.
Setting up the integrated humidifier
Warning: Allow the heater plate and water to cool down for approximately 15
minutes before removing the water tank. A burn may result from: touching
the heater plate, coming in contact with the heated water, or touching the
tank pan.
Cautions
• Do not attempt to fill the humidifier water tank while it is still attached to the device.
• Use only room temperature distilled water in the tank. Do not put any chemicals or
additives into the water. Possible airway irritation or damage to the water tank may
result.
• Do not fill the humidifier water tank above the maximum fill line. If the humidifier water
tank is overfilled, water may leak into the therapy device, humidifier, or onto your
furniture. Damage to the therapy device may occur.
Note: Clean the humidifier water tank before first use. Refer to the “Home cleaning:
humidifier water tank” section in this manual.
