System Monitor PSM 2
REV 1A – Software V3
Page 8
6.1 Setup „Display “
Language
Please choose your language.
Brightness operation
You can adjust the brightness of the
display illumination while in operation
from 20 to 100 %.
Brightness Day
You can adjust the brightness of the
display illumination in the normal mode
from 20 to 100 %.
Brightness Night
You can adjust the brightness of the display illumination in the standby mode
from 0 to 20 %.
PSM Restart
The PSM2 will be re-started
Device Info
Shows the software version of the PSM2 monitor.
Standby
To save energy and reduce glare, the PSM2 display will enter a standby mode of
reduced brightness after an adjustable delay. The delay is adjustable from 20 to 250
seconds after the last operation. If you choose any value under 20 the PSM2 won`t
enter standby mode.
Start page
You can set the page that the PSM2 System Monitor displays when powered up as
either the main menu or one of the available submenus.
Change PIN
Access to the Setup menu is protected by a 4-digit PIN. You can change this PIN at
any time from the factory setting of “1234“. If the PIN is lost or cannot be recalled, the
factory default setting of 1234 can be re-set by pressing “PIN” on the first page of the
Setup menu for at least 15 seconds.
