System Monitor PSM 2
REV 1A – Software V3
Page 18
7.5 Submenu AC (LAU)
Needed interface/component: LAU 216 / 3xx
This menu shows the energy situation of the
AC system, where the symbols on the top
line show the available sources. If these
sources are active, the voltage is shown.
The active system source is shown by a line
connecting it to the symbol on the
lower line. If a transducer ACW is connected,
the AC parameters of voltage, current,
frequency and the kW hours used since the
last reset are shown in the symbol on
the lower line.
7.6 Submenu AC (combi inverters)
Needed interface/component: Studer X-tender incl. interface XCOM-CAN or
Mastervolt Ultra incl. interface CMB.
This screen shows the energy situation of the AC plant if a combi- inverter/charger is
connected. By touching the blue button in the centre it’s possible to configure the most
important settings:
-
Device ON/OFF
-
Inverter ON/OFF
-
Silent mode (only when using a mastervolt) ON /OFF
-
Settings for the shore connection current
