03
Before installation please make sure you read these instructions carefully and
observe the safety guidelines set out below
Avoid exposing your equipment to harsh conditions such as wet or damp places, high humidity, strong
vibration, extremely high or low temperatures, strong sunlight and places that are very dusty.
Do not cover or place heavy objects on the receiver unit. Make sure there is sufficient clearance around the
unit to allow adequate ventilation.
Never push objects into holes or ventilation slots.
To save power, switch off mains power or pull out the mains power plug when you are not using the
equipment.
Don’t continue to use this equipment if you have spilt liquids in it, if it is damaged in any way or if it does
not work normally. Immediately unplug the equipment and get expert advice.
Pull the mains plug out of the wall socket during thunderstorms and disconnect the satellite antenna.
Cleaning: disconnect the mains supply and use only a lightly dampened soft cloth. Do not use
chemical solvents or strong detergents as these may damage the cosmetic finish.
• To prevent electric shock, do not remove any cover.
• If anything goes wrong, don’t try and fix it yourself, get a qualified engineer to look at it
• Do not expose this equipment to dripping or splashing
• Never put a naked flame source on or near the equipment
• This product is not a toy. Do not let young children play with the equipment.
Package Contents
Before installation, please check the items of the package. The package should contain
the following items:
1 . DVB-S2 receiver x 1 pc
2. Remote control x 1 ps
3. Instruction manual x 1 pc
Your remote control (RCU) requires 2 x AAA batteries (Not Supplied)
The Satellite Dish
Your dish should be properly installed and azimuth and elevation must be precisely set up.
This unit works with DisEqC 1.2 & 2.0 on a compatible antenna positioner.
Ask your dealer for information.
Important Safety Instructions
Customer Careline:
08457 573479
Local Rate - UK only
Technical Support: www.philex.com/support