17
System Settings / USB Device
7-8
7.5 Database Reset
Return all settings to the original factory default settings.
parameters by using this function.
Press the MENU key. Select
System Setting
with
/
buttons
and press
OK
. Select
Database Reset
with
/
buttons and
press
OK
.
When the menu asks you to enter the PIN code, if you are sure
you want to reset, enter the code using the Number buttons.
The default pin is 0000.
Please Note:
All channel listings information will be deleted if
you select
Database Reset
.
8. USB Device
Please Note:
This menu will be only be available when your
receiver has detected a suitably formatted (FAT 32) USB 2.0
memory device such as an external hard drive.
To be detected your memory device should be plugged into
the USB socket on the back of the receiver and switched on
before
you switch on your satellite receiver.
8.1 To Record a Programme
Make sure that your memory device has been plugged into
the USB socket on the back of the receiver and switched on
before
you switch on your satellite receiver.
When you wish to record a programme that you are currently
watching, press the record,
RED
button on the remote control,
a recording time setting will appear at the top of screen.
To stop recording, press the
YELLOW
button and select
YES
when the prompt
Want to stop recording?
appears.
Customer Careline:
08457 573479
Local Rate - UK only
Technical Support: www.philex.com/support
