Non-fault conditions
The door can't
•The program is running.
open.
•There are clothes between the door and
door seals.
There is an odor.
•There may be a smell of rubber because
some components are made up of rubber.
There is too little
• Roller washing machine just needs a little
water when wash
water when operating.
and rinse.
No water
inflowing.
• ls the tap turned on?
• ls the inlet pipe frozen?
•Are the filters blocked?
Water inflows halfway.
• lf the water level declines, the washer will
supply water automatically.
21
Water outflows
•Check if add the detergent with too much
when washing.
bubbles.
Remaining time
• lf clothes are oft center when spin,
changes
spinning time will extend to correct the
deviation.
There is abnormal
•Check if the power line touches with cabinet.
noise when spin.
•Have the transport bolts been dismantled?
•Are there some hairpins or coins in the roller?
•The washer will stop working after the
The washer can't
failure of electricity. When the power is
work after the
restored, it still can't continue to work.
failure of electricity.
Please press the power button and
reset the program.
[
