Installation instruction
•Make sure the temperature of the places where the washer is installed
or placed above 0
°C or put it outside.
•Place the washer correctly according to management standards and
regulations.
•Keep the base of washer ventilated when it is placed on the ground
with carpet.
•There are too much pests in villages. Please keep the surroundings
clean because any damages caused by cockroaches or other pests
don't belong to warranty.
•The household washing machine isn't intended to be built-in.
Transport bolt
Washers are installed with transport bolt to prevent internal damage
in transit.
Dismantle the transport bolt
1. ln order to prevent internal damage in transit, 4 bolts are installed.
Before using the washer, dismantle the bolt.(see chart
1 )
•lf the bolts are not dismantled, violent vibration, noise and trouble
will be caused.
5
2. Use the attached wrench to loosen the 4 bolts. (see chart 2)
3.Twist the bolt rubber slightly and then pull out the bolts, keep the
bolts and wrench as standby.(see chart 3)
•The bolts should be remounted no matter when to transport the washer.
4.Use attached stopples to seal the screw holes. (see chart 4)
-----
(
)'
--,
Notice :
please don't
dismantle the
drainpipe fixed
device.
