Philco PLS 1040, Руководство пользователя

Страница: 13 / 84

EN - 11
01/2011 Copyright © 2011, Fast ČR, a. s.
• Increases laundry amounts also necessitate the use of an increased amount of detergent in the wash.
• Pour fabric softeners (conditioners) into the fabric softener compartment in the detergent drawer. Do
not go over the MAX mark. Otherwise the fabric softener will fl ow out the siphon into the water used for
washing.
• If the fabric softener is very thick then dilute it with water before placing it in the compartment. The thick
fabric softener could clog up your siphon and so prevent the fabric softener from entering the washing
machine.
• You can use liquid detergents for all washing programs without a prewash. For this purpose install into the
second detergent compartment in the drawer a measuring cup and pour in the detergent according to the
mark shown on the measuring cup.
Operating the washing machine
Selecting programs and functions
Select a program and additional functions appropriate for your laundry according to table 1.
Start/pause button
Press this button to start the selected program or to stop a currently running program.
Starting a program
• Set to program selector to the desired program.
•
The program indicator light will turn on.
•
If necessary you may select one or more additional functions.
•
Start the selected program by pressing the Start/pause button.
Changing a program
If you have selected a program and you do not wish it to run to its completion:
•
Press the Start/pause button.
• Turn the program selector by turning it to O (off ).
• Set the program selector to the desired program. (You may select a program according to table 1.)
•
The program indicator light will turn on.
•
Start the selected program by pressing the Start/pause button
Cancelling a program
If you want to stop a program that is running sooner:
•
Press the Start/pause button.
• Turn the program selector by turning it to O (off ).
•
Turn the program selector to the drain or spinning program.
• The program indicator light will turn on.
•
Start the selected program by pressing the Start/pause button.