Philco PLS 1040, Руководство пользователя

Страница: 8 / 84

EN - 6
01/2011 Copyright © 2011, Fast ČR, a. s.
• After the connections are complete, check that the connections do leak, by fully opening the tap.
• Check that the supply hoses are not bent, broken or cracked.
• Connect the supply hose to a 3/4" threaded water tap.
• If the washing machine has a dual water inlet (for hot and cold water), the temperature of the hot water
should not exceed 70 °C.
Hot water inlet (valve with a red fi lter)
Cold water inlet (valve with a white fi lter)
Water drain connection
• Check that the supply hoses are not bent, twisted, cracked or excessively stretched.
• The drain hose should be installed at a height of min. 60 cm and max. 100 cm above the ground.
• The end of the drain hose may be inserted directly into the drain opening or to a special end fi tting
attached to the drain of the wash basin.
• Never attempt to extend the length of the drain hose by adding extra parts.
NOTE:
Do not place the drain hose into a container, bucket or sink.