Philco PLD 1473, Руководство пользователя

Страница: 26 / 92

EN - 24
06/2012 Copyright © 2012, Fast ČR, a. s.
SECTION 8: AUTOMATIC FAILURE DETECTION SYSTEM
Your machine is equipped with systems which will both take the necessary precautions and warn you in case
of any failure by controlling it self constantly during the washing processes.
FAILURE CODE PROBABLE FAILURE THE PROCESS TO BE DONE
The door is not shut properly.
Shut the door properly so that
you hear the click. If the problem
persists, turn off the machine
unplug and apply to the nearest
authorized service immediately.
The water level in your machine
is below heater. The pressure of
your water supply may be low or
locking.
Turn on the tap to the end.
Water may be cut, check it. If the
problem is still continuing, your
machine will automatically stop
after a while. Unplug your
machine, turn off the tap and
apply to the nearest authorized
service.
The pump has failed or the pump
fi lter is obstructed.
Clean the pump fi lter.If the
problem persists, apply to the
nearest authorized service.(*)
There is an excessive amount of
water in your machine.
Your machine will automatically
drain the water. After your
machine has completed the
draining process, shut down
your machine and unplug. Close
the tap and apply to the nearest
authorized service.
The heater of your machine or the
heat sensor has failed.
Shut down your machine and
unplug. Turn off your tap and
apply to the nearest authorized
service.
The motor has failed.
Shut down your machine and
unplug. Turn off the tap and apply
to the nearest authorized service.
(*) See the section regarding the maintenance and cleaning of your machine.