Philco PD 860, Руководство пользователя

Страница: 9 / 108

EN - 7
03/2011 Copyright © 2011, Fast ČR, a. s.
Electrical connection
Check that the voltage and frequency of the used power source correspond to the information on the
appliance's rating label. Insert the power plug only into a properly grounded power socket. If the socket to
which the appliance will be connected is not properly grounded, replace the socket rather than using adapters,
etc., which could lead to overheating or burning.
WARNING!
•
The incorrect connection of the grounding conductor may create a risk of injury by electrical
shock.
•
If you have any doubts about the proper grounding of the appliance, ask a qualifi ed electrician
or service technician for verifi cation.
•
Do not modify the power plug supplied with the appliance. If the power plug does not correctly
fi t into your power socket, ask a qualifi ed electrician to replace it.
Water supply
How to connect the water supply hose?
You must connect the dishwasher to a water supply using a new hose. Do not use perished, old or otherwise
damaged hoses. Water pressure must be in the range 0.04 MPa to 1 MPa. If the water pressure in your system is
lower, ask for advice from our service department.
•
Pull out the hose fully from the storage area in the rear part of the dishwasher.
•
Screw in the water supply hose to a tap with a 3/4" thread.
•
Fully open the water supply before turning on the dishwasher.
Water supply hose
The water supply hose has double wall. The water fi lling system guarantees intervention by blocking the
water supply in the event that the water supply hose fails.
WARNING!
The hose connected to the water supply to the sink may break, if the sink is connected to the same
water system as the dishwasher. We recommend that you disconnect the hose and seal the opening.
How to disconnect the water supply hose?
•
Shut off the water inlet.
•
Reduce water pressure by pressing the reduce pressure button. This will reduce the water pressure and
prevent water from possibly squirting out into the room.
•
Unscrew the water supply hose from the water tap.