Philco PD 860, Руководство пользователя

Страница: 28 / 108

EN - 26
03/2011 Copyright © 2011, Fast ČR, a. s.
1. Turn the fi lter anticlockwise and then pick it up.
2. Pick up the main fi lter.
3. Pick up the fi ne fi lter.
NOTE:
By following all the steps in this procedure you will take out the fi ltration system. Reinstall it again by
proceeding from step 3 to step 1.
Recommendation:
•
After every use of the dishwasher check that the fi lters are not clogged.
•
You can take out the fi ltration system by unscrewing the coarse fi lter. Remove any food remains
and clean out the fi lters under running water.
NOTE:
You should clean the entire fi ltration set once per week.
Cleaning the fi lters
To clean the coarse and fi ne fi lters use a brush. Reassemble the individual parts of the fi lter as shown on
pictures 1, 2 and 3. Reinsert them back into the dishwasher in their place and press them downwards.
WARNING!
Do not knock on the fi lters when cleaning them. Otherwise the fi lters could bend, which would
lower the effi
ciency of the dishwasher.